TE10S Single Phase Solid State Relay
Description
TE10S
Compact, low cost 240V and 480V SSR
16, 25, 40 and 50A rated at 45°C
AC and DC logic input
Partial load failure detection
Simple installation and maintenance
These robust, generously rated thyristor units are ideally suited for applications where voltage and current surges can be expected. these units can be used to control SWIR loads (current de-rating required).
Specification
| Digital Comms | None |
|---|---|
| Maximum Current (Amps) | 50A |
| Maximum Voltage (Volts) | 500V |
| Controlled Phases | 1 |
| PLF and/or PLU | Yes |
| Diagnostics | No |
| Alarm Types | Yes |
| Input Analogue | No |
| Input Logic | Yes |
| Firing Mode Burst Firing | Yes |
| Heater Type Constant Resistance | Yes |
| Heater Type SWIR | Yes |
